Ammonium Thiophosphonate EP Oil Additives Lubricant Anti Corrosive Oil

Ammonium Thiophosphonate Advanced Anti-Wear & Extreme Pressure Lubricant Additive

Ammonium thiophsphonate

T307 is an ammonium thiophosphonate antiwear agent and extreme pressure (EP)

additive commonly used in lubricants. These types of compounds are often added to

oils or greases to enhance their ability to withstand high-pressure conditions, reduce wear,

and improve the overall performance of the lubricant in heavy-duty applications.

Thiophosphonates like BSD307 typically contain sulfur and phosphorus, which are key

elements for providing EP properties by forming protective films on metal surfaces,

reducing friction and wear under high-stress conditions.

Recommended Dosage (wt%):

0.4%-2.0%

Product Appearance

Packaging and acceptance
This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according

to customer needs.
Product identification, sample retention, and delivery acceptance shall be carried out in accordance with

SH/T0164 standard.

Product storage, transportation, and compounding agent blending operations and precautions
The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be

clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other

petroleum products;
When adjusting oil, the maximum temperature should not exceed 75 ℃;
Long term storage temperature should not exceed 50 ℃.
Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using,

pay attention to sealed storage.

Health and Safety
The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general

petroleum products in terms of safety, environmental protection, and use.
Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away

from children.
Wear protective gloves when using, and the operator does not need to take special safety precautions. Once

it splashes into the eyes or skin, rinse thoroughly with plenty of water.
Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling

and disposal, and are prohibited from being discharged into water bodies or soil.
For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).